AWS Inter Region VPN与VYOS

我正在尝试在两个AWS Region(俄勒冈州和爱尔兰)之间建立VPN.在俄勒冈州,我使用了AWS VPN服务,在爱尔兰,我使用了市场上的vyos EC2实例.在Oregon,我启动了一个实例,并为ICMP请求打开了安全组(0.0.0.0/0用于测试).我的Vyos实例的安全组也是开放的.

VPN双方都是UP,但我有一个奇怪的问题.

测试1:

从EC2-Oregon到EC2-Vyos的Ping:工作

测试2:

从EC2-Vyos到EC2-Oregon的Ping:不工作

但是如果我在EC2-Oregon上启动一个wireshark,我看到了ICMP请求,问题似乎就在ICMP回复上了:

11.609958 169.254.12.138 -> 10.10.2.45   ICMP 98 Echo (ping) request    id=0x2f3d, seq=1/256, ttl=63
11.929702   10.0.1.177 -> 10.10.2.45   ICMP 71 Time-to-live exceeded  (Time to live exceeded in transit)
12.610213 169.254.12.138 -> 10.10.2.45   ICMP 98 Echo (ping) request   id=0x2f3d, seq=2/512, ttl=63
12.929659   10.0.1.177 -> 10.10.2.45   ICMP 71 Time-to-live exceeded (Time to live exceeded in transit)
13.610111 169.254.12.138 -> 10.10.2.45   ICMP 98 Echo (ping) request  id=0x2f3d, seq=3/768, ttl=63
13.929952   10.0.1.177 -> 10.10.2.45   ICMP 71 Time-to-live exceeded (Time to live exceeded in transit)

IPs Informations:
10.0.1.177: EC2-Vyos
10.10.2.45: EC2-Oregon
169.254.12.138: The IP of my vti1 in the Vyos conf

TEST3:

将Irlande中的另一个EC2实例ping到EC2-Oregon:不工作

但是在EC2-Oregon实例上,我再次看到了ICMP请求(10.2.10是我在爱尔兰的EC2实例):

  0.361551    10.0.2.10 -> 10.10.2.45   ICMP 98 Echo (ping) request  id=0x130d, seq=4/1024, ttl=62
  0.361569   10.10.2.45 -> 10.0.2.10    ICMP 98 Echo (ping) reply    id=0x130d, seq=4/1024, ttl=64
  0.627332   10.0.1.177 -> 10.10.2.45   ICMP 71 Time-to-live exceeded (Time to live exceeded in transit)
  1.369717    10.0.2.10 -> 10.10.2.45   ICMP 98 Echo (ping) request  id=0x130d, seq=5/1280, ttl=62

我不明白问题所在.

我的vyos配置:

interfaces {
ethernet eth0 {
    address dhcp
    duplex auto
    hw-id 0a:14:25:f4:8f:e9
    smp_affinity auto
    speed auto
}
loopback lo {
}
vti vti0 {
    address 169.254.12.62/30
    description "VPC tunnel 1"
    mtu 1436
}
vti vti1 {
    address 169.254.12.138/30
    description "VPC tunnel 2"
    mtu 1436
}
}
protocols {
bgp 65000 {
    neighbor 169.254.12.61 {
        remote-as 7224
        soft-reconfiguration {
            inbound
        }
        timers {
            holdtime 30
            keepalive 30
        }
    }
    neighbor 169.254.12.137 {
        remote-as 7224
        soft-reconfiguration {
            inbound
        }
        timers {
            holdtime 30
            keepalive 30
        }
    }
    network 10.0.0.0/16 {
    }
}
static {
    route 10.0.0.0/16 {
        next-hop 10.0.1.1 {
        }
    }
}
}
service {
ssh {
    disable-password-authentication
    port 22
}
}
system {
config-management {
    commit-revisions 20
}
console {
    device ttyS0 {
        speed 9600
    }
}
host-name VyOS-AMI
login {
    user vyos {
        authentication {
            encrypted-password "*"
            public-keys aws_key-XXXXXX {
                key AAAAB3....
                type ssh-rsa
            }
        }
        level admin
    }
}
ntp {
    server 0.pool.ntp.org {
    }
    server 1.pool.ntp.org {
    }
    server 2.pool.ntp.org {
    }
}
package {
    auto-sync 1
    repository community {
        components main
        distribution helium
        password ""
        url http://packages.vyos.net/vyos
        username ""
    }
}
syslog {
    global {
        facility all {
            level notice
        }
        facility protocols {
            level debug
        }
    }
}
time-zone UTC
}
vpn {
ipsec {
    esp-group AWS {
        compression disable
        lifetime 3600
        mode tunnel
        pfs enable
        proposal 1 {
            encryption aes128
            hash sha1
        }
    }
    ike-group AWS {
        dead-peer-detection {
            action restart
            interval 15
            timeout 30
        }
        key-exchange ikev1
        lifetime 28800
        proposal 1 {
            dh-group 2
            encryption aes128
            hash sha1
        }
    }
    ipsec-interfaces {
        interface eth0
    }
    nat-traversal enable
    site-to-site {
        peer 52.XX.XXX.113 {
            authentication {
                id 52.XX.XXX.132
                mode pre-shared-secret
                pre-shared-secret 7bRiFaXXXXXX
                remote-id 52.XX.XXX.113
            }
            connection-type initiate
            description "VPC tunnel 1"
            ike-group AWS
            local-address 10.0.1.177
            vti {
                bind vti0
                esp-group AWS
            }
        }
        peer 54.186.XXX.33 {
            authentication {
                id 52.XX.XXX.132
                mode pre-shared-secret
                pre-shared-secret AT2Q4XXXXXXXXXX
                remote-id 54.XXX.XXX.33
            }
            connection-type initiate
            description "VPC tunnel 2"
            ike-group AWS
            local-address 10.0.1.177
            vti {
                bind vti1
                esp-group AWS
            }
        }
    }
}
}

更新:

问题解决了.

您可以在此repo上找到整个(工作)配置过程https://github.com/mboret/aws-vyos